By 
There are many ways in which you can control the quality of light that is emitted by your flash. Reflectors and diffusers are two essential tools to soften the quality of light. In this discussion, we will look at how you can soften the light emitted by your flash and how to use the tools for that.
A flash is a very powerful tool in your possession. It helps you take good sharp, well-exposed images in any condition. However, a flash is a very difficult tool to manage. The light emitted by a flash is bright and intense and is generally considered a source of hard light. as we have seen in some other discussions, a hard light source is not a good light for shooting portraits. A flash is generally used for portrait photography only. Thus, the need for converting a hard light into a soft light.
In order to convert a hard light into soft light, such as when you are shooting with a flash, use a specialized tool. In the case of a flash, that specialized tool is a flash diffuser or a reflector.
Diffusers
Diffusers come in all kinds of shapes and sizes depending on the type of flash that you’re using. If you’re using a good-quality flash, chances are that it was shipped with a diffuser in the package. If your flash was not shipped with a diffuser, you could always buy one from the open market. Many different kinds are available, including those that pop on your flash head.
Of course, instead of buying something off the shelf, you can always use the DIY method and build something on your own. One of the easiest methods is to use some diffusing material, such as tracing paper or a piece of translucent white fabric, and tape it over your flash.
Flash reflectors
a flash reflector works a little differently than a diffuser does. A flash reflector does not pop over a flash. Instead, it is used to redirect the throw of the light. Flash reflectors such as the ones that fasten on either side of the flash head our purposed to direct the flash towards the ceiling or any open wall. The whole purpose is to bounce the light before it reaches the subject. When you bounce the light, it becomes softer in nature and more conducive for portrait photography.
If you don’t have flash reflectors, you can also use a flash head and point it directly toward the wall or ceiling. Some flashes allow you to do that. They can tilt and swivel independently of the position of the flash. In that case, you don’t need a flash reflector.
Alternatively, you can make a flash reflector following the DIY methods. Make sure you do not use a colored material to make the flash reflector. Make sure it is made up of white material or any neutral color.
Photographers! Sell your images on www.planetstockphoto.com.
