DIY E-Liquid: A Guide to Making Your Own Custom Vape Juice

If you’re a vaper looking for a way to create a customized vaping experience, DIY e-liquid may be just what you need. By making your own vape juice at home, you can experiment with a wide range of flavors and nicotine strengths to find the perfect combination for your tastes. In this article, we’ll walk you through the process of making your own e-liquid, including the equipment you’ll need and some tips for getting the best results. We’ll also discuss how you can use your DIY e-liquid with devices like the Suorin Air Pro.

Equipment You’ll Need

Before you get started, you’ll need to gather some equipment. Here’s what you’ll need to make your own e-liquid:

1. Propylene glycol (PG)
2. Vegetable glycerin (VG)
3. Flavorings
4. Nicotine
5. Syringes
6. Beakers or mixing cups
7. Plastic or glass bottles with dropper tips
8. Gloves and safety goggles

The exact amounts and types of ingredients you’ll need will depend on the specific recipe you’re following. You can find many e-liquid recipes online or create your own based on your personal preferences.

Step-by-Step Guide

Once you have your equipment and ingredients ready, it’s time to get started. Here’s a step-by-step guide to making your own e-liquid:

1. Begin by putting on gloves and safety goggles to protect yourself.
2. Determine the ratios of PG and VG you want to use in your e-liquid. Most e-liquids use a ratio of 50/50, but you can adjust the ratio to your liking.
3. Use a syringe to measure out the desired amount of PG and VG into a mixing cup or beaker.
4. Add your desired amount of flavoring to the mixture, using a syringe to measure it out. Be sure to use food-grade flavorings that are specifically designed for vaping.
5. If you’re adding nicotine to your e-liquid, use a separate syringe to measure out the desired amount and add it to the mixture.
6. Stir the mixture thoroughly using a clean stirring rod or spoon.
7. Let the mixture sit for a few minutes to allow the flavors to meld together.
8. Once the mixture has steeped, transfer it to a plastic or glass bottle with a dropper tip. Be sure to label the bottle with the flavor and nicotine strength.

Using Your DIY E-Liquid with the Suorin Air Pro

Once you’ve made your own e-liquid, you’ll need a device to use it with. the Suorin Air Pro is a popular choice for vapers who prefer a compact, pod-based device. To use your DIY e-liquid with the Suorin Air Pro, follow these steps:

1. Remove the pod from the device.
2. Remove the silicone plug from the pod.
3. Fill the pod with your DIY e-liquid, being careful not to overfill.
4. Replace the silicone plug.
5. Insert the pod back into the device.
6. Wait a few minutes to allow the wick to saturate with e-liquid.
7. Take a puff and enjoy your custom-made vape juice!

In conclusion, making your own e-liquid can be a fun and rewarding way to create a customized vaping experience. With the right equipment and ingredients, you can experiment with a wide range of flavors and nicotine strengths to find the perfect combination for your tastes. When using your DIY e-liquid with a device like the Suorin Air Series Vaping Device, be sure to follow the manufacturer’s instructions and take safety precautions to protect yourself while handling the ingredients.

Tammy James